|
Card
Readers / Access Controls
| Alarm Craft has the largest selection of products from the most well respected manufacturers anywhere. Please browse through our product catalog for a partial listing of available equipment, or contact us for more details. |
 |
|
Corby |
International
Electronics |
Northern
Computers |
.
Card
Readers
Corby Model # 4042 Wiegand Card Reader
|
Corby Access Control Systems support the use of Magnetic Stripe, Wiegand and Code 39 Bar Code card technologies which require a card to be either "swiped" or "inserted" into the reader.
- Indoor/Outdoor
- Swipe
- Beige Color
contact
us
@ 718/886-0090 for details.
|
|
|

Swipe Reader 4042 .
|
Corby Model # 4176 HID Proximity Card Reader
|
Corby Proximity readers sense the presence of a valid card when it is within range (3"- 30" depending on the reader) and allows access to a door.
- Read range 2" - 5"
- Indoor/Outdoor
- Mullion
- Gray
contact
us
@ 718/886-0090 for details.
|
|
|

Mullion Reader 4176.
|
Corby
Access Cards
|
Corby Access Control Systems support the use of Bar Code, Magnetic Stripe and Wiegand card technologies which require a card to be either "swiped" or "inserted" into the reader.
The System also supports Proximity readers which sense the presence of a valid card when it is within range (3"-30" depending on the reader) and allows access to a door.
| # 4048 |
- Plain white - Photo ID - For use with 4042, 4044, 4046 readers |
| #
4049 |
- Standard card - For use with 4042, 4044, 4046 readers |
|
|

Access Card 4049
.contact
us
@ 718/886-0090 for details.
|
Corby
Datachip
Readers
|
Corby Data Chips contain sophisticated electronics to store a personal identification number in a coin shaped, sealed, stainless steel canister. This superior design allows the Data Chip to be easily attached to any smooth surface including existing photo ID cards, badges, or
keychains.
| #
4301 |
Adapter module with wire harness (System 1/4/5/10 require an adapter for each reader) |
|
# 4302 |
Single-gang, flush mount plate with one 12 VDC Green LED, read head and mounting hardware |
|
.contact
us
@ 718/886-0090 for details.
|
|
|

Datachip Reader 4306
|
Corby
Datachips
|
Corby Data Chips contain sophisticated electronics to store a personal identification number in a coin shaped, sealed, stainless steel canister.
| #
4320 |
Chip assembled on a metal tag with Corby logo |
|
.contact
us
@ 718/886-0090 for details.
|
|
|

Corby Data Chips
|
Locks
.
|
SECO-LARM® # E-941SA-1200 Electromagnetic Lock
|
- Holding
force:
— E-941SA-1200: 1200lb.
(545kgs)
- Anodized
aluminum housing
- Dual
voltage: 12 or 24 VDC
(selectable)
- No
residual magnetism
- Detachable
faceplate
- Adjustable
mounting bracket
- MOV
surge protection
- Complete
mounting hardware included
- Angle
brackets, "Z" brackets, and
glass door brackets available for easy
mounting.
details
|
|
|
SECO-LARM® # 942FC-1300 Weatherproof Electromagnetic Gate Lock
.
|
- Ideal
for indoor and outdoor
applications, even in severe
weather
- Ideal
for slide or swinging gate
- Holding
force— 1,300lb. (591kgs)
- Water-resistant
and vandal-resistant
attractive stainless-steel
finish
- Maintenance-free,
factory-sealed design
details
|
|
|
SECO-LARM® # SD-997B Electric
Deadbolt .
|
- Adds
concealed deadbolt security to most wood or
hollow metal doors, with the added
convenience of electrical operation.
- Stainless
steel bolt, 5/8" diameter, 5/8"
throw.
- Fail-safe
operation (unlocks if power is lost).
- Door
open/close monitor (NO/C/NC).
- Adjustable
door lock delay timer (0, 2.5, 5, or 9
seconds).
- Control
wire allows release without cutting unit’s
power.
- Magnetic
switch determines door position for positive
locking.
- Solenoid
shuts off if door not closed properly to
prevent burning out..
details
|
|

|
Accessories
.
|
SECO-LARM® #
SD-969 Series Armored Door Cords
|
Surface mounted 18" stainless-steel cable, designed to conduct power to electric locks or access systems mounted in doors.
|
|
|
|
Remote
Plates
|
Alarm Controls Corp. # TS-1 - Request To Exit Station
|
- Large 1.5" Diameter Green Mushroom Button
- N/O & N/C Contacts
- Momentary Switch Action
- Contacts Rated 10 Amps @ 35VDC or 120VAC
- Red & Green LEDS operate on 12 or 24 Volts AC/DC
- Unit Fits in Standard Single Gang Electrical Box
- UL Approved & CSA Certified Components
details
|
|
|
Alarm Controls Corp. #
TS-2 - Request To Exit Station
|
- Large Green 2" Square Push Button
- Momentary Switch Action
- Switch Illuminated with Long Life Bulb, 12 or 24 Volt
- Single Pole, Double Throw Contacts, Rated 10 Amp
- Switch Terminals Provided with Color Coded Leads
- Unit Fits in Standard Single Gang Electrical Box
- UL Approved & CSA Certified Components
details
|
|
|
Alarm Controls Corp. # MCK-1 - Mortise Cylinder Station
|
- 1.75 Inch Stainless Steel Front Plate for Narrow Stile
- S.P.D.T. Momentary Switch, Rated 4A @ 28VDC
- 8 Inch Color Coded Stranded Wire Switch Leads
- Tamper Proof and Slotted Head Screws Included
details
|
|
|
|
|
Alarm Controls Corp. #
MCK-2 - Mortise Cylinder Station
|
- 1.75 Inch Stainless Steel Front Plate for Narrow Stile
- S.P.D.T. Momentary Switch, Rated 4A @ 28VDC
- 8 Inch Color Coded Stranded Wire Switch Leads
- Green
LED Operates on 12 or 24 Volts
- Tamper Proof and Slotted Head Screws Included
details
|
|
|
Alarm Controls Corp.
-
Narrow Remote Plates
.
|
RP-1
Narrow 1.5" Satin Stainless Steel Front Plate, Aluminum Back Plate w/ "D" Hole for Ace
Lock.
RP-1M
Double "D" Hole for Medeco Lock
RP-2 Narrow 1.5" Ivory Finish Steel Front Plate, Aluminum Back Plate, Normally Open Push Button, Red LED
RP-3
Narrow 1.5" Satin Stainless Steel Front Plate,
Aluminum Back Plate with "D" Hole for Ace Lock.
RP-24-Dress Up Kit
Narrow 1.5" Satin Stainless Steel Front Plate, Aluminum Back Plate with "D" Hole for Ace Lock
contact
us
@ 718/886-0090 for details.
|
RP-1M
|
RP-3
|
|
Alarm Controls Corp.
- MIni Remote Plates
.
|
MP-20
Chrome Plated Brass Plate, Size 1.125" x 2.25" with "D" Hole For Ace Lock
MP-21 Double "D" Hole for Medeco Lock
MP-26
Chrome Plated Brass Plate, Size 1.125" x 2.25" with Normally-Open Red Pushbutton with Guard Ring
MP-26A Normally-Closed Black Pushbutton with Guard Ring
MP-28
Chrome Plated Brass Plate, Size 1.125" x 2.25" with .25 Dia. Red LED
MP-44 Chrome Plated Brass Plate, Size 1.125" x 2.25" with D.P.D.T, FA-200 Shunt Switch, Alternate Action Pushbutton Changes from Black to Orange When Depressed
contact
us
@ 718/886-0090 for details.
|
MP-26
|
MP-44
|
|
Alarm Controls Corp.
- Single Gang Remote Plates
.
|
RP-4 Satin Stainless Steel Plate with Red,Green .25" Dia. LEDs, 12 VDC, .75 Dia. "D" Hole for Ace Lock
RP-5 Satin Stainless Steel Plate with Red,Green .25" Dia. LEDs, 12 VDC Flush White Normally-Open PushButton, Contacts Rated 1/2 Amp.
RP-6 Double "D" Hole for Medeco Lock
RP-7 Satin Stainless Steel Plate with Red .25 Dia. LED, 12 VDC, .75 Dia. "D" Hole for Ace Lock
RP-8 Double "D" Hole for Medeco Lock
RP-9 Satin Stainless Steel Plate with Red,Green .25" Dia. LEDs, 12 VDC
RP-9L .5 Dia. Red, Green LEDs, 12 VDC
RP-20 or RP-21 Satin Stainless Steel Plate with .75 Dia. "D" Hole for Ace Lock or Double "D" Hole for Medeco Lock
RP-22 1.125 Dia. Hole for Sonalert
RP-23 .75 Dia. Hole for Piezo Alert
RP-23A .625 Dia. Hole for LA32 Buzzer
RP-26 Satin Stainless Steel Plate with Normally-Open Red PushButton and Guard Ring, Contacts Rated .75 @ 125 V
RP-26A N/C Black PushButton
RP-27 Two N/O PushButtons
RP-27A Two N/C PushButtons
RP-28 Satin Stainless Steel Plate with .25 Dia. Red LED, 12 VDC
RP-29 .25 Dia. Green LED, 12 VDC
RP-28L Large .5 Dia. Red LED
RP-29L Large .5 Dia. Green LED
RP-30 Satin Stainless Steel Plate with .25 Dia. Red LED and .5 Dia. Hole
RP-30L Large .5 Dia. Red LED, 12 VDC
RP-31 Satin Stainless Steel Plate with four .25 Dia. Red LEDs, 12 VDC
RP-32 Satin Stainless Steel Plate with Four .25 Dia. Green LEDs, 12 VDC
RP-33 Satin Stainless Steel Plate with .25 Red, Yellow, Green LEDs, 12 VDC, .75 Dia. "D" Hole for Ace Lock
RP-34 Double "D" Hole for Medeco Lock
RP-35 Satin Stainless Steel Plate with .25 Dia. Red, Yellow, Green LEDs, 12 VDC, Normally-Open, Flush White Pushbutton, Contacts Rated .5 A
RP-44 Satin Stainless Steel Plate with One D.P.D.T. Shunt Switch, Contacts Rated 2 A.
RP-45 Two FA-200 Shunt Switches
RP-46 or RP-47 Three or Four FA-200 Shunt Switches
RP-48 Six FA-200 Shunt Switches
RP-49 Satin Stainless Steel Plate with One D.P.D.T. Alternate Action, FA-200 Shunt Switch, Contacts Rated 2 A. Indicator Changes from Black to Orange .75 Dia., "D" Hole for Ace Lock.
RP-46 P/F/M 3 Colors Satin Stainless Steel Plate with Three D.P.D.T. Alternate Action Switches, Silk Screened "Police", "Fire", "Medical", in Three Colors with Corresponding Symbols.
RP-46 P/F/M Silk - Screened in Black Only
RP-50 Single Gang Stainless Steel Plate, Aluminum Back Plate with "D" Hole for Ace Lock, Normally-Closed Tamper Switch, .25 Dia. Red, Green, LEDs 12 VDC
RP-50M Double "D" Hole for Medeco Lock
WP-4 Weather-Proof Remote Station, Hinged Self-Closing Cover, Red & Green LEDs, 12 VDC, "D" Hole for Ace Lock
WP-6 Double "D" Hole for Medeco Lock
contact
us
@ 718/886-0090 for details.
|
RP-4
RP-9L
RP-26
RP-30L
RP-31
RP-35
WP-6
|
|
Access
Controls
|
Corby Model # 1000
System 1 Access Control .
|
The single door System 1 (Model 1000) supports 250 users and each user can be added or deleted in seconds using the built-in Programming Keypad. The programmable relay can control almost any device including an electric Door Lock, arm or disarm an Alarm System, shunt an Alarm Device, or operate a Garage Door.
- Supports
1 Door
- Brilliant
16 Character Display
- 3
Programmable Time Schedules
(21 Zones)
- Off-Site
Set-up & Reporting
- Forced
Entry & Door Ajar
- Request-To-Exit
Input
- RS232
Outputs
details
.
|
|
|
|
Corby Model # 2016 System 2 Access Control
.
|
The standard SYSTEM 2 (Model 2016) supports 2700 users and each user can be added or deleted in seconds using the built-in Programming Keypad. The programmable relays can control almost any device including electric Door Locks, arm or disarm Alarm Systems, shunt Alarm Devices, or operate Garage Doors.
- Supports
2 Doors
- Expandable
to 16 Doors
- Brilliant
48 Character Display
- Expands
to Thousands of Users
- 26
Bit Wiegand Format Capability
- Off-Site
Set-up & Reporting
- RS485
& RS232
- Outputs
Forced Entry & Door Ajar
- Request-To-Exit
Input
details
|
|
|
|
Corby Model # 2003 System 2 Access Control
.
|
The single door System 2 (Model 2003) supports 295 users and each user can be added or deleted in seconds using the built-in Programming Keypad. The programmable relay can control almost any device including an electric Door Lock, arm or disarm an Alarm System, shunt an Alarm Device, or operate a Garage Door.
- Supports
1 Door
- Expandable
to Model 2016
- 3
Programmable Time Schedules
- Brilliant
48 Character Display
- Expands
to Thousands of Users
- 26
Bit Wiegand Format Capability
- Off-Site
Set-up & Reporting
- RS485
& RS232 Outputs
- Forced
Entry & Door Ajar
- Request-To-Exit
Input
contact
us
@ 718/886-0090 for details.
|
|
|
|
|
Page index
|
International Electronics -
Access Controls
|
FLEXIBLE CHOICES:
Standalone keypads, keypad + card, card systems
SIMPLICITY:
Every Door-Gard* wires and programs the same way
No learning curve needed as system expands!
.
|
|
International Electronics - Command & Control Keypads.
.
|
4 independent outputs / 4 independent timers / On board 8 amp form C relay / 120 programmable user codes / Real Time audit trail option /
Remote Triggering input can pulse any combination of outputs
|
# 212M Mullion
|
* Narrow Style for aluminum door frame
* Weather Resistant Metal Housing
* Two Piece Design-electronics + Keypad
* Bronze or Satin Aluminum
|
|
|
#
212se Sealed Keypad
|
* Weatherproof, Metal Housing
* Vandal Resistant
* Brushed Aluminum
|
|
|
#
212r Ruggedized
|
* Weatherproof One Piece Metal Housing
* Wall, Post, Gooseneck Mounting
* Black or White
|
|
|
#
212i Indoor
|
* Flush Mount
|
|
|
212 Outdoor Weather Resistant
|
* Flush Mount
|
|
|
data
sheet
|
contact
us @ 718/886-0090 for
more details.
|
|
|
Northern Computer
PassPoint Access Controls
|
PassPoint is a total Access Control solution, combining a rich set of access control features with an easy-to-use Windows 95/98 interface. The system, once configured by using the PassPoint Express software, can be fully operated in an off-line mode. The system would subsequently only need to be brought on-line for future card enrollment and other configuration changes as the need arises.
| DEK |
PassPoint
Door Expansion Kit |
| CEK |
PassPoint
Card Enrollment Kit |
|

PassPoint Access
Starter Kit
|
|
|
|