Ademco - ASC- # 2500 - Audio & Shock Glassbreak Detector
|
Senses audio and shock at the same time.
25' range from glass.
UL listed for all types of glass protection.
SMD (surface mount device) circuit design for better RF immunity.
SPDT relay output for open or closed circuit activation.
Alarm LED is latching or momentary.
No test mode jumpers to move.
.details |
|
|
Ademco - ASC- # 2520 - Acoustic Glassbreak Detector
|
8 bit microprocessor analyzes the audio signal produced by breaking glass.
Mounts on any wall or ceiling in direct line of sight of glass.
25' range. UL listed for all types of glass: plate, laminated, tempered or wired.
Alarm memory is jumper selectable. SPDT relay for open or closed circuit.
Order 2520FM for flush mount applications.
Test period automatically times out after 5 minutes. |
|
Ademco -
FG701 - Glassbreak Simulator .
|
 Compatible with all IntelliSense and ADEMCO brand glassbreak detectors
Calibrated signal output to allow true range verification
Remote test-mode activation - works from 15 ft away*
Low battery voice announcement
Digitally produced glassbreak sound |
|
Ademco - ASC- # ASC-SS1 - Glassbreak Shock Sensor
|
Mounts directly on glass surface.
Protects all glass types: plate, tempered, laminated and wired.
Outstanding false alarm immunity.
Epoxy sealed against moisture and corrosion. |
|
Ademco - ASC- # 5849 - Glassbreak detector, dual technology
|
- Audio discriminator plus shock sensing
.
- Tamper protection
- 25' range
- Includes replaceable lithium batteries
contact
us @ 718/886-0090 for details.
|
|
|
Ademco - ASC- # 5852 - FlexGuard® Adjustable Glassbreak Detector
|
ASIC-based FlexCore™ signal processing offers unmatched false alarm immunity without compromising performance. The best overall performance ever! The FlexCore™ signal processor utilizes an Application Specific Integrated Circuit (ASIC), so that sound data can be processed in parallel rather than sequentially. This permits sound frequency, duration and amplitude to be analyzed 50% faster to minimize false alarms while maintaining the highest possible level of detection. The sensitivity is DIP switch selectable up to 25’, allowing the installer to fit the acoustic properties of each room.
contact
us @ 718/886-0090 for details.
|
|
|
|
|
|
IEI # 834L - Viper
Plus Series Glassbreak detector .
|
The Viper Plus is a frame mountable piezoelectric sensor with a custom ASIC microchip. The sensor responds to the directly conducted energy released by breaking glass. As a result, the Viper will not false alarm from any ambient sound, or low frequency vibration. The Viper can be used on virtually ant size window, even
mulit-pane. |
 |
|
IEI #
510 - Veri-Test and Tri-Guard Audio Glassbreak detector .
|
Hears a 1'x1' Plate, Wired, Tempered, Laminated.
Hears 360 degrees in any direction.
20' from the pane will catch them all.
Constantly sekf-adjusts for any acoustical changes in the room.
Patented "Anytime" end user test feature proves Veri-test is working even when armed!
details
.
|
|
|
Ademco - ASC- # PBD Photobeam Series - Dual Photoelectric Beam Motion Detectors
|
- Indoor/outdoor
use for commercial installations
requiring perimeter or barrier
protection
- Indoor/outdoor
use for commercial built-in
viewfinder for electro-optical
beam alignment
- Dual
beam simultaneous interruption
required
for alarm verification
- Adjustable
beam interruption period for varying
installation conditions
- Automatic
Gain Control (AGC) assures reliable
operation in variable
environmental
conditions (snow, frost,
fog and rain)
- Continued
operation with 99.5% signal loss
contact
us @ 718/886-0090 for details.
|
|
|
Ademco - ASC- # PBQ Photobeam Series - Quad Photoelectric Beam Motion Detectors
|
- Indoor/outdoor
use for commercial installations.
requiring perimeter or barrier
protection
- Built-in
viewfinder for electro-optical beam
alignment
- Quad
beam simultaneous interruption
required
for alarm verification
- Adjustable
beam interruption period for varying
installation conditions
- Automatic
Gain Control (AGC) assures reliable
operation in variable
environmental conditions
(snow, frost, fog and rain)
- Continued
operation with 99.75% signal loss
- Digital
delay filtering separate legitimate
signals
from background noise
- Three
optional beam frequencies to resolve
potential problems with cross talk
contact
us @ 718/886-0090 for details.
|
|
|
|
Optex # BX-100 Plus - BoundaryGuard photoelectric detector
.
|
The BX-100PLUS is a slim 2"x9" photoelectric detector for the exterior surface of buildings which protects multiple doors and windows. BX-100PLUS provides more economical and superior protection for roll-up doors and windows than multiple contacts or audio discriminators. Attempts to break glass or force entry are detected before the attack. Even when windows or roll-up doors are left open for ventilation, BX-100PLUS stays on guard.
|
|
|
|
detail
|
More
sensors |
More
Alarm Security Equipment |
Optex # AX-70T / AX-130T - Photoelectric detectors
.
|
Outdoor photoelectric detectors with dual beams for high immunity to false alarms caused by falling leaves, birds, blowing debris, and other outdoor hazards. AX-70T & AX-130T also feature over 99% beam blockage tolerance, adjustable beam interruption period, automatic gain control, and anti-frost cover design. Easy installation with view finder sights and voltage meter alignment jacks, (pole mount brackets included).
|
|
|
|
detail
|
|
|
Optex # AX-100/200 Plus - Photoelectric detector
.
|
AX-100PLUS & AX-200PLUS are the industry's most full-featured short range photobeams. 'Finger-Touch' alignment controls and precise beam definition combine with gun-sights and voltage meter jacks to make installation easy. A weatherproof (IP55) housing applies rubber "O" rings to keep out insects and dirt. Lightning protection exceeding 14kV, form C relay, and a 5-year warranty assure satisfaction. Optional heaters and back covers are available.
|
|
|
|
detail
|
|
|
Optex # AX-100S / AX-100SR - Photoelectric detectors
.
|
These indoor photobeams are designed for easy installation and superior reliability. Both AX-100S (surface) and AX-100SR (recess) mount directly to a single gang electrical box for easy installation in prewire or retrofit applications. Both models feature special optics that eliminate the need for vertical adjustments and an LED alignment indicator. Indoor photobeams detect blockage and are excellent for rooms not suited to PIR detectors.
|
|
|
|
detail
|
|
|
Alarm Controls Corp. # PBM / PBL Panic Station
|
- Large
1.5" Red Mushroom Button w/ Guard
Ring .
- Normally
Open or Normally Closed Contacts
- Mounts
on a Single Gang Wall Plate
- Momentary
"M" or Latching
"L" Switch Assembly
- Standard
Silk Screen Legends
- Available
6, 12, or 24 AC/DC
contact
us @ 718/886-0090 for details.
|
|
|
Ademco - ASC- # TS300 - Dual Temperature Sensor
|
- Simultaneous
operation of local and remote probes
.
- Local
sensor 32° to 140° F (0° to 60°C)
+/-3°F (+/-2.2°C)
- Remote
probe -40° to 140° F (-40° to 60°C)
+/-4°F (+/-2.2°C)
- Programmable
hysteresis prevents multiple alarms
- Output
Matrix Mapping provides versatility
and flexibility
- Audible
alarm with silence timeout
- Alarm
memory (up to 8 events)
details
|
|
Ademco
- ASC- # 470 - Water Sensor
|
Will
detect water or any conductive
nonflammable liquid. Ideal for
placement by sump pumps, washing machines,
kitchens, etc., where flooding is a
possibility. 12 volts DC, low
current drain. Form C (SPDT)
output. Provided with two
sensitivity settings for greater
flexibility.
details
.
|
|
|
Ademco
- ASC- # 11 - Vibration Contact
|
Protects ceilings, walls, safes and glass
.
Adjustable sensitivity
Small and inconspicuous
Available in white or brown
details
.
|
|
|
Seco-larm #SS-079-O - Door Jamb Contact
|
Small size and recessed mounting virtually eliminates tampering
Screw terminals, SPST contact rated 0.25A at 250VAC and 0.75A at 125VAC
N.O. plunger contact for normally-closed circuits
Off-white
details
.
|
|
|
Seco-larm
#SS-076 - Toggle Switch
|
SPST toggle switch rated 3 Amp at 125VDC
Attractive plastic case with 2 screw holes and pre-wired 6" (15cm) leads for easy surface mounting
Colors: Gray, Snow-white
details
.
|
|
|
Seco-larm
#SS-038-2CSBO - Eyeball Switch
|
DPDT switch (with two form-C contacts)
Can be changed to momentary by removing interior clip.
Orange "eyeball" indicates "ON" or "OFF"
Black case and collar // Rated 2 Amp.
Fits 9/16" (14mm) hole
details
.
|
|
|
|
U.S.P. # HUB-2SA Momentary SPDT, 3 Screw Terminals
|
| HUB-2SA |
Latching
DPDT 6 Screw Terminals |
contact
us @ 718/886-0090 for details. .
|
|
|
| U.S.P. # Model 654 - Emergency Switch N.O./N.C.
|
|
