|
Expansion
Devices and Accessories
Alarm Craft stands behind all their manufacturer's warranties and can arrange for "No Hassle" shipping. Contact us for more information.
|
Ademco - # 659EN - Line fault monitor
|
The cost effective, versatile Vista-20SE is an eight-zone control panel that gives you installation flexibility along with features that customers
want. |
|
|
Ademco - # 6220 Series Printer - Security system printer
|
The 6220 Series printers install quickly. Their small footprint allows for easy placement on any surface, no fancy printer stands are required. A handy wall mount bracket is supplied for convenient mounting of the printer next to the control cabinet. Simply connect the printer to the control’s serial or parallel port (cable not included), plug in the wall mount transformer, turn on power and you’re done. A4100SM Module (including cable) is required for use with ADEMCO VISTA controls. Uses "off-the-shelf" adding machine paper.
|
|
|
Ademco - # 4286 VISTA -
Interactive phone module
|
With the newly enhanced VISTA Interactive Phone Module (VIP) your customers can perform all the functions of a wall mounted keypad using any ordinary touch-tone phone, from home or any remote location, your customers can check their security system’s status, arm or disarm their system, even operate lights and appliances. And the VIP’s high quality voice output, with its large vocabulary, verbally identifies open zones and prompts your customer to take appropriate action. |
|
Ademco - # 4193SN SIM - Serial interface module
|
Micro-miniature two-zone V-Plex™ adapter. Makes any hardwired contact device V-Plex™ ready. Built-in serial number for addressing. One supervised zone and one unsupervised zone. UL listed fire and burglary applications. |
|
Ademco - # 4101SN - Addressable relay module
|
The ADEMCO 4101SN V-Plex™ Single Output Relay Module is an accessory for use with ADEMCO control panels that support serial number addressable polling loop output devices.
The 4101SN features form C relay contacts rated at 2A, 28VACNDC with contact supervision. The position of the relay is supervised, but not the actual external contact wiring. Operating power and communication with control panels via the addressable V-Plex™ polling loop.
Electronics mounted in a small plastic case with tamper-protected cover. |
|
Ademco - # 4190SN - Two-Zone Remote Point Module
|
The ADEMCO 4190SN addressable V-Plex™ module is a two-zone expander which allows use of the available expansion zones provided by ADEMCO controls that support V-Plex devices.
DIP switch programmable. Left Zone - EOLR supervised, open or closed circuit sensors. Right Zone - unsupervised, closed circuit sensors. UL listed for fire and burglary installations.
|
|
|
Ademco - # 4208U - V-Plex™ Eight Zone Polling Loop Expansion Module
|
The AIT 4208U is a universal 8-zone expander which allows use of the available expansion zones provided by AIT controls that support V-Plex devices (replaces 4208 module). Uniquely identified 8 EOLR supervised zones (all zones use 10K resistors, supplied). DIP switches can be used to set zone numbers or serial numbers. When used in serial number mode, each serial number in the selected group can be assigned to any zone number. Loops A&B can be programmed for fast response (10msec).
Tamper protected. Easy installation and programming. UL864 Commercial Fire listing. |
|
Ademco - # 4204 - Intelligent Relay Board
|
 The 4204 Intelligent Relay Board adds relays which are connected to the Control/Communicator via the control's console wiring. The relay outputs are programmed by the appropriate control for a variety of functions. The 4204 is ideal for applications that require additional sounding devices, strobe lights or other devices that need or desire to be controlled by the control panel. The 4204 is housed in a white plastic case for wall mounting and can be mounted in a Universal Can. |
|
Ademco - # 4100SM - Serial Interface Module
|
Interface for printer for: VISTA-50P, VISTA-100,
VISTA-128B and VISTA-128FB.
Direct wire download interface for : 4140XMP, VISTA-40, VISTA-50P, VISTA-100, VISTA-128B and
VISTA-128FB. |
|
Ademco - # 4219 - Wired Zone Expander
|
Adds up to 8 end-of-line supervised zones. Connection made to the control's console wires. Supported on VISTA-20HW. |
|
Ademco - # 4229 - Wired Zone Expander / Relay Board
|
Provides 8 end-of-line supervised zones and 2 on-board programmable form C relays. Connection made to the control's console wires
Supported on VISTA-20HW. |
|
Ademco - # 269SN / 270R - Hold-up Switches
|
- Double-pole double-throw contacts
.
- Supplied with lock mounted switch and one key
- Designed for silent application
- Housed in a stainless steel housing
- Available with plastic decor cover with economical reset mechanism as 270
|
|
|
More
Alarm Security Equipment
|
|
|
Alarm Controls Corp. # TX-6 Terminal Expander
|
- Expands
One Wire Pair to Three Pair .
- Color
Coded Wire Leads
- Clearly
Marked Barrier Terminal Blocks
- Eliminates
Terminal Screw "Wire Bunch
Up"
- Mounts
with Double Coated Tape or Snap Track
contact
us
@ 718/886-0090 for details.
|
|
|
|
|
Alarm Controls Corp. #
TX-12 Terminal Expander
|
- Expands
One Quad Connector to Three Quads
.
- Ideal
for Multiple Keypad Installations
- Avoids
Intermittent Connections
- Clearly
Marked Barrier Terminal Blocks
- Mounts
with Double Coated Tape or Snap Track
contact
us
@ 718/886-0090 for details.
|
|
|
More
Alarm Security Equipment
|
|
|
Ademco - # 4500 - Thermostat Module
|
Part of the Energy Saver System. Works with the 4286 to expand the home control feature of the VISTA Security System to include temperature control. |
|
Napco # GEM-EZM4/8 & EZM8 / Zone Expansion Modules
.
|
• Expands the capacity of the Gemini control panels by increasing their on-board zones in selectable increments of four or eight zones
• The GEM-EZM4/8 is supported by the GEMP816 and P1632 only
• The GEM-EZM8 is supported by the P816, P1632, P3200 and P9600
• Very affordably priced
.details |
|
|
|
